Cabina de extracción de gases ChemFAST Top 18 con superficie de acero inoxidable

ChemFAST belong to the latest generation of ductless fume cupboards using the most innovative molecular filtration technology manufactured by Faster, in which the choice of materials of construction of the highest quality guarantees a safe working environment together with fume containment for protection from chemicals, vapors and aerosol in the laboratories. ChemFAST Top are equipped with a manual device for adjusting the air velocity to obtain the appropriate air velocity for each specific contaminant used.
Monitoring data:
power on/off
Light on/off
Variable speed air regulation
Hour-counter
Stand-by green light BENEFITS Best cleanability: Front stratified hinged safety glass, the frontal opening is set to 200 mm. The whole front of the cabinet can also be opened upwards as it is hinged on the top – in order to allow easy access for complete and effective cleaning and decontamination. Cold rolled epoxy painted galvanized external structure for superior resistant against chemical solvents aggression. High Level Lighting: The safety glass side-windows with the ideal positioning and sizing of the light-system provide the highest level of luminosity to the work area. Easy handling and maintenance: ChemFAST can pass through standard 800 mm wide door openings thanks to the overall depth of just 760mm. All service operations are available from the front of the cabinet. Charcoal filters can be easily replaced from the front. More than 10 different kind of activate charcoal filters able to absorb and handle any organic compounds and inorganic gases and vapors. Highly effective protection from toxic vapors High filtration efficiency Large adsorption capacity Built in safety: all electronic components, switches, lighting and motor fan have been selected and installed fully isolated from air contaminated with solvents and therefore meet the most stringent electrical safety requirements. OPERATIONAL PRINCIPLES Air from external environment is directly drawn inside the working chamber preventing from the chemical vapors being split to the external environment. Inlet air is firstly filtered by means of G4 pre-filter located on the top of working area in order to remove particulates; air is then filtered, by means of activated charcoal filters positioned on the top of the equipment , which absorb lower molecular organic compounds and inorganic gases and vapors, before being exhausted in the environment.